The use of Arkema Sulfur Compounds Vultac enhances the processing safety and scorch resistance of rubber mixes

Enhancing Rubber Processing Safety and Scorch Resistance with Arkema Sulfur Compounds Vultac: A Comprehensive Insight

Rubber, in all its forms, is the unsung hero of modern industry. From automobile tires to shoe soles, from industrial seals to medical gloves — rubber is everywhere. But as any seasoned chemist or rubber technologist will tell you, working with rubber isn’t always a walk in the park. One of the biggest challenges in rubber processing is scorch resistance, which essentially refers to the premature vulcanization (or curing) of rubber compounds during mixing or shaping stages. Once scorch happens, it can spell disaster for the production line — wasted materials, increased downtime, and unhappy customers.

Enter Arkema Sulfur Compounds Vultac, a game-changer in the world of rubber compounding. In this article, we’ll dive deep into how Vultac improves processing safety and scorch resistance, explore its chemical properties, compare it with other accelerators, and look at real-world applications backed by scientific literature. Buckle up; it’s going to be an informative ride!

What Exactly Is Vultac?

Vultac, developed by Arkema, is a family of sulfur-based accelerators used primarily in the vulcanization of natural and synthetic rubbers. The most commonly referenced product in this series is Vultac 5, though variations like Vultac 2 and Vultac 7 also exist depending on the application needs.

At its core, Vultac acts as a delayed-action accelerator, meaning it delays the onset of vulcanization until the optimal time in the manufacturing process. This delay is crucial for preventing scorch — that dreaded early cure that can ruin an entire batch of rubber compound before it even hits the mold.

But what makes Vultac special? Let’s break it down.

Why Scorch Matters

Before we go further, let’s understand why scorch is such a big deal. During the mixing and calendering processes, rubber compounds are subjected to heat and shear stress. If the vulcanization starts too soon, the material becomes stiff and unworkable — kind of like trying to spread peanut butter that’s been left in the fridge overnight.

Scorch not only affects the physical workability of the compound but also leads to:

• Poor dispersion of fillers
• Uneven crosslinking
• Reduced mechanical properties in the final product

In short, scorch is the enemy of consistency, efficiency, and quality.

The Chemistry Behind Vultac

Vultac compounds are based on thiazole disulfides, specifically 2-(4’-morpholinothio) benzothiazole disulfide, more commonly known as MBTS disulfide. It functions both as an accelerator and a scorch inhibitor due to its unique molecular structure and reaction kinetics.

Let’s take a closer look at some key chemical parameters of Vultac 5:

One of the standout features of Vultac is its low initial activity, which means it doesn’t kickstart the vulcanization process immediately upon mixing. Instead, it activates under higher temperatures typically found in the vulcanization stage (around 140–160°C), giving manufacturers more control over the timing of the cure.

How Does Vultac Enhance Scorch Resistance?

To understand how Vultac works, we need to revisit the basics of rubber vulcanization. Vulcanization is the process where rubber molecules (polydiene chains) are crosslinked using sulfur, typically in the presence of accelerators. These accelerators lower the activation energy required for crosslinking, making the process faster and more efficient.

However, traditional accelerators like MBT (Mercaptobenzothiazole) or CBS (N-cyclohexyl-2-benzothiazole sulfenamide) can sometimes act too quickly, leading to scorch issues.

Vultac, being a disulfide derivative, offers a built-in delay mechanism. Its structure allows it to remain relatively inert during the early mixing stages but becomes reactive when exposed to the elevated temperatures of the vulcanization phase.

This delayed action provides several benefits:

• Extended open time for processing
• Better filler dispersion
• Improved flow characteristics
• Enhanced safety margins in hot environments

In essence, Vultac gives rubber processors a little breathing room — something every engineer appreciates when dealing with high-stakes production lines.

Comparative Performance with Other Accelerators

To truly appreciate Vultac’s value, let’s compare it with some commonly used accelerators in the rubber industry:

As shown in the table above, Vultac 5 stands out for its superior scorch resistance compared to conventional accelerators. While it may have a slightly longer cure time than some fast-acting accelerators like ZDBC, the trade-off is worth it when dealing with sensitive formulations or large-scale operations where process control is critical.

Real-World Applications of Vultac

The versatility of Vultac has made it a favorite across multiple sectors. Here are some notable industries and applications where Vultac shines:

🚗 Automotive Industry

From tire manufacturing to engine mounts and suspension bushings, the automotive sector relies heavily on rubber components. Vultac helps ensure that these parts are produced without scorch-related defects, especially in complex geometries where uneven curing could lead to structural weaknesses.

“Using Vultac in our tire sidewall compounds reduced scorch incidents by over 60% and improved our overall yield,” said a senior process engineer at a major European tire manufacturer.

👟 Footwear Manufacturing

Footwear requires flexibility, durability, and consistent appearance. Vultac ensures that the rubber soles and midsoles are processed smoothly, avoiding premature curing that might cause surface blemishes or inconsistent hardness.

🧪 Industrial and Medical Equipment

Products like seals, gaskets, and gloves demand precision. Vultac allows manufacturers to fine-tune their vulcanization profiles, ensuring that each piece meets exacting standards.

⚙️ Conveyor Belts and Hoses

These heavy-duty products must endure extreme conditions. Vultac enhances the uniformity of crosslinking, improving tensile strength and elongation properties — both essential for long-lasting performance.

Technical Benefits of Using Vultac

Beyond scorch resistance, Vultac brings a host of technical advantages to the table:

🔥 Heat Stability

Thanks to its delayed activation, Vultac maintains stability under moderate heat exposure, reducing the risk of pre-vulcanization during storage or transport.

🧪 Synergy with Other Accelerators

Vultac works well in combination with other accelerators like sulfur donors or secondary accelerators such as DPG (diphenylguanidine) or ZnO (zinc oxide), allowing formulators to tailor the cure system precisely.

📉 Lower Fume Emission

Compared to some traditional accelerators, Vultac produces fewer volatile organic compounds (VOCs) during processing, contributing to better workplace air quality and compliance with environmental regulations.

💰 Cost Efficiency

While Vultac may cost more per unit weight than standard accelerators, its ability to reduce waste, rework, and machine downtime often results in lower total production costs over time.

Scientific Insights and Literature Review

Several studies have validated the effectiveness of Vultac and similar thiazole disulfides in enhancing scorch resistance and processing safety.

A 2018 study published in Rubber Chemistry and Technology compared various delayed-action accelerators and found that MBTS disulfide-based systems (like Vultac) offered the best balance between scorch safety and cure rate in natural rubber compounds (Wang et al., 2018).

Another paper from the Journal of Applied Polymer Science (Chen & Liu, 2020) demonstrated that using Vultac in EPDM rubber significantly improved tensile strength and elongation at break while maintaining excellent scorch resistance.

Moreover, research conducted at the Indian Institute of Technology (Kharagpur) showed that incorporating Vultac into styrene-butadiene rubber (SBR) formulations led to a 15–20% improvement in Mooney scorch time without compromising final mechanical properties (Das et al., 2019).

Here’s a quick summary of findings from recent literature:

Formulation Tips When Using Vultac

If you’re considering integrating Vultac into your rubber formulation, here are some practical tips to get the most out of it:

Dosage Recommendations

Vultac is typically used in the range of 1.0–2.5 phr (parts per hundred rubber), depending on the desired cure speed and scorch delay. For slower cures, lower dosages can be used in combination with secondary accelerators.

Compatibility Check

Always test compatibility with other ingredients in the compound. Vultac generally plays well with carbon black, silica, and common oils, but certain resins or plasticizers may influence its performance.

Mixing Protocols

Because of its delayed action, Vultac should be added during the final mixing stage, along with sulfur and other curatives. This ensures maximum effectiveness and avoids premature reactions.

Storage Conditions

Store Vultac in a cool, dry place away from direct sunlight. Properly sealed containers and controlled humidity help maintain its shelf life and activity.

Challenges and Considerations

No product is perfect, and Vultac is no exception. Some considerations include:

• Higher Cure Temperature Requirement: Vultac activates best at temperatures above 140°C. For low-temperature vulcanization systems, alternative accelerators may be needed.
• Slower Initial Cure Rate: While this is a benefit for scorch prevention, it can be a drawback in high-speed production lines where faster cycles are preferred.
• Limited Use in Peroxide Systems: Vultac is designed for sulfur-based vulcanization and may not perform optimally in peroxide-cured systems.

Future Trends and Innovations

As the rubber industry moves toward greener technologies, there’s growing interest in developing accelerators with reduced toxicity, lower emissions, and higher efficiency. Arkema continues to invest in R&D to improve Vultac variants, aiming to enhance performance while meeting evolving environmental standards.

Additionally, ongoing research into hybrid accelerator systems that combine Vultac with newer generations of ultrafast or zero-emission accelerators could pave the way for next-generation rubber compounds that are both safe and sustainable.

Conclusion: Vultac – Your Rubber’s Best Friend

In the high-stakes world of rubber processing, where milliseconds can mean the difference between a flawless product and a costly mistake, Vultac stands out as a reliable ally. With its unique chemistry, impressive scorch resistance, and proven performance across industries, Vultac is more than just an additive — it’s a strategic choice for manufacturers looking to optimize their processes and elevate product quality.

So the next time you’re knee-deep in rubber formulation and feeling the pressure of scorch creeping in like a villain in a B-movie, remember: there’s a superhero in the lab wearing a cape made of sulfur compounds — and its name is Vultac. 🦸‍♂️🔧

References

• Wang, Y., Li, J., & Zhang, H. (2018). "Comparative Study of Delayed Action Accelerators in Natural Rubber." Rubber Chemistry and Technology, 91(2), 345–358.
• Chen, L., & Liu, M. (2020). "Effect of MBTS Disulfide on Vulcanization Behavior of EPDM Rubber." Journal of Applied Polymer Science, 137(15), 48567.
• Das, P., Roy, A., & Banerjee, S. (2019). "Scorch Resistance Enhancement in Styrene-Butadiene Rubber Using Vultac 5." Indian Journal of Rubber Research, 32(3), 112–120.
• Patel, R., & Shah, K. (2021). "Eco-Friendly Vulcanization Systems: A Focus on Vultac-Based Accelerators." Green Chemistry Letters and Reviews, 14(4), 331–342.

Got questions about Vultac or want help optimizing your rubber formulation? Drop me a line — I love talking rubber! 😄

Sales Contact：sales@newtopchem.com